Laboratory tests on the engineering properties of sensor-enabled geobelts (SEGB)

To measure geosynthetic reinforcement strains, sensor-enabled geobelts (SEGB) that perform the reinforcement and self-measurement functions were developed in this paper. The SEGB of high-density polyethylene (HDPE) filled with carbon black (CB) were fabricated by both the industry and the laboratory. To study the mechanical properties and tensoresistivity performance of the SEGB, in-isolation tests and in-soil tests were performed. Hot pyrocondensation pipes (HPP) were used to protect the SEGB against the influence of water. For the SEGB specimens developed in the laboratory, the optimal CB filler content was 47.5%. For the SEGB fabricated by the industry, the optimal CB content was slightly decreased compared to the SEGB fabricated in the laboratory. For the modified SEGB sealed with HPP, the strain at the fracture was improved, while its tensile stress and the frictional property of the geobelt-soil interfaces both decreased slightly. In the pull-out tests, the self-measurement function of the SEGB was proved to be effective for evaluating the deformation behavior of geosynthetic reinforcement. The results are helpful for further application of SEGB technology in engineering.     

贵州省干线公路沥青路面典型病害研究

"十二五"期间,随着贵州省交通建设的飞速发展,干线公路的里程及施工质量也迅速提高。但同时,干线公路沥青路面出现了许多早期病害,并且病害种类也更加多样化。本文对贵州省9个地市的干线公路沥青路面进行了系统调查,并就路面典型病害的成因进行了分析。     

Effect of different quenching processes following solid-solution treatment on properties and precipitation behaviors of 7050 alloy

The effects of quenching in different ways following solid-solution treatment on properties and precipitation behaviors of 7050 alloy were investigated by transmission electron microscopy (TEM), scanning electron microscopy (SEM), selected area electron diffraction (SAED), hardness and electrical conductivity tests. Results show that after quenching in different ways, electrical conductivity of the alloy decreases rapidly in the first 48 h of natural aging. The electrical conductivity of 7050 alloy in natural aging state is determined by the size and density of GP zones, and the size of GP zones is the main factor. After natural aging for 70 d, the size of GP zones is 1.8–2.6 nm in matrix of the immersion quenched sample and it is 1.4–1.8 nm in matrix of both water mist and forced air quenched samples. After natural and artificial peak aging, the hardness of the water mist quenched sample is HV 193.6 and its electrical conductivity is 30.5% (IACS) which are both higher than those of the immersion quenched sample. Therefore, water mist quenching is an ideal quenching method for 7050 alloy sheets after solid-solution treatment.     

超快冷技术在唐钢中厚板生产线上的应用

介绍了基于超快速冷却的新一代TMCP工艺的基本思想以及中厚板超快冷装置的技术特点,即高冷却强度、高冷却均匀性和灵活的控制方式。结合唐山中厚板材有限公司的以超快速冷却为核心的新一代TMCP工艺在合金减量化Q345、高品质Q420qD、工艺减量型Q550D等钢种的工业实践,表明该工艺较传统的TMCP工艺在减少合金元素含量、提高钢板强度和冲击韧性等方面具有明显的优势。     

山西野生木本油脂植物资源现状分析

为掌握山西省野生木本油脂植物资源现状,采用实地踏查、试验分析和资料收集相结合的方法,对山西省内主要山地、自然保护区不同野生木本油脂植物资源的种类、分布及含油率进行全面调查统计,并用索氏提取法测定33种木本油脂植物的含油率。结果表明:山西省野生木本油脂植物共43科84属168种。目前开发利用较多的种类有翅果油树、中国沙棘、文冠果等,具有较大开发潜力的有榛属、朴属、山胡椒属、盐肤木属、卫矛属、南蛇藤属、梾木属、槭属、栾树属、野茉莉属、连翘属等。对山西省野生油脂植物的种类组成、取用部位、用途以及利用现状进行了分析,并提出保护与利用建议。     

Numerical Study of Condensation Heat Transfer in Curved Square and Triangle Microchannels

Abstract

A numerical study of condensation heat transfer in curved square and triangle microchannels with various curvatures is conducted. The model is based on the volume of fluid approach and user-defined routines. The predictive accuracy of the numerical results is assessed by comparing the heat transfer coefficient with available correlation. After the validation, the effects of the mass flux and heat flux on heat transfer coefficient are analyzed in detail. Increasing mass flux could strengthen heat transfer performance, while wall heat flux has little effect on condensation heat transfer coefficient. The curved microchannels show an advantage in heat transfer enhancement comparing with the straight ones, and the enhancement performs better in curved microchannels with larger curvatures. Besides, the heat transfer performance could be enhanced in triangle microchannels in comparison with square microchannels.     

苛化提纯盐湖锂矿回收含氟碳酸锂的研究

主要论述了一种提纯盐湖锂矿和回收含氟碳酸锂的方法。工艺流程：盐湖锂矿（含氟碳酸锂）通过一次水洗涤除去其中所含的大部分可溶性杂质后,按一定配比将其投入到石灰乳料浆中加热到90~95 ℃反应4 h,过滤后得到氢氧化锂溶液,将氢氧化锂溶液在100~120 ℃下进行加压浓缩4 h精制得到钙镁离子和硅含量较低的氢氧化锂溶液;向精制后的氢氧化锂溶液中通入食品级二氧化碳沉锂得到工业级碳酸锂,或继续浓缩制备氢氧化锂;用以上工艺生产得到的工业级碳酸锂通过二次碳化、阳离子交换树脂除去钙镁离子、重结晶可得到硅含量为10×10^-6以内的高纯碳酸锂,或浓缩得到钙含量为5×10^-6、镁含量为2×10^-6以内的单水氢氧化锂。     

煤磨热风管道改造的效果

中联万基水泥有限公司4500t/d熟料生产线采用SCLW4-12×13.4第四代篦冷机,煤磨热风取风口和余热发电AQC热风取风口在篦冷机同一对称位置,煤磨与余热发电系统存在争风现象,开停煤磨对余热发电系统影响较大。通过从废气管道处开孔,加装管道和电动阀,与热风管道汇合通往煤磨沉降室,调整相应阀门开度,可以控制入煤磨烟气温度,这样不但提高了余热发电量,而且提高了煤磨产量,同时也降低了窑头排风机的负荷,降低了熟料生产电耗。